XTOOL InPlus IP819TP TPMS Programming Scanner Bluetooth Car Diagnostic Tools ECU Coding Key Programmer 31+ Services With CANFD

XTOOL INPLUS IP819TP AUTOMOTIVE DIAGNOSTIC TOOL WITH COMPLETE TPMS PROGRAMMING FUNCTIONS

InPlus IP819TP Tire Pressure Scanner is a Combination of IP819 and TP150, Providing a Full Range of TPMS Services Such as: TPMS System Diagnostics, TPMS Relearn/Reset, Activation/Relearn 98% of all Known TPMS Sensor, TPMS Programming (TPMS Programming Tool is limited to XTOOL TS100 Sensor). With the XTOOL IP819TP Scanner you will be able to monitor and repair the TPMS System, Check Tire Pressure, Temperature, Battery Life, Read Sensor ID, Read/Clear DTC, Reset TPMS to Turn Off Warning Lights, Activate/Program after Sensor Replacement/ Relearn Sensors, etc., allowing you to drive safely on the road.

ADVANCED ECU CODING & ECU CONFIGURATION

InPlus IP819TP TPMS Scanner With ECU Coding For Audi, For VW, For Skoda, Perform ECU Coding, Component Matching, Adaptive Data Reset; to Optimize Vehicle Performance and Customize Car Settings, Such as: Enabling or Disabling Certain Features (Seat Belt Alarm, Reverse Buzzer, Mirrors Auto Fold, Auto Stop/Start...), Updating Software, Making Changes to the Parameters. With ECU Coding and Guided Functions For VAG Vehicles, Technicians Can Enhance Vehicle Performance and Efficiency Through Precise Execution. Note: Avalability varies by car.

FULL BI-DIRECTIONAL CONTROLS

InPlus IP819TP as a Bidirectional Scanner also known as acive test or actuator test, can output the commands to ECUs, read the ECU data and monitor the operation of the actuators. Through comparative analysis, the car diagnostic scanner will let you quickly know whether a specific system, component, or subsystem is functioning properly or not, even a small fault that is hard to find out, to provide in-depth diagnostic tests and pinpoint fault causes. like: Injector Tests, Fuel Injector Balance, Compression Test, Cooling Fan, A/C Clutch On/Off, ABS Motor Pump, Windows/Wipers/Sunroof/Doors. Note: Active Tests available vary across vehicles.

OE ALL SYSTEMS DIAGNOSTICS

InPlus IP819TP Car Diagnostic Scanner can perform dealership level diagnosis, analysis and maintenance to ensure more all-around, fast, and accurate! Diagnostic functions included: Read/ Erase Codes; Live Data; Freeze Frame; ECU Information; Active Tests; PID & Graph.

TPMS DIAGNOSTIC TOOL COME WITH 36+ SERVICE FUNCTIONS

Oil Light Reset, EPB, SAS, DPF, BMS Reset, Throttle, TPMS Reset, ABS Bleeding, Injector Coding, Key Programmer, Gearbox Match, Suspension, Window Initialization, Seat Match, Headlight, ECU Configuration, A/F settings, Start/Stop Reset, Airbag Repair, Instrument Cluster, Language Change, Transporte Mode, Tire Upgrade, Gear Learning, Power Balance, EEPROM, Electronic Pump Activation, EGR Relearn, VGT Relearn, HV Battery, A/C Relearn, Speed Limit, Clutch Adaption, FRM Reset, Rain/Light Sensor, Reset Control Unit and etc. Note: Special Functions do NOT work on all cars.

POWERFUL KEY PROGRAMMING TOOLS

InPlus IP819TP Key Fob Programmer can disable a lost vehicle key and program the replacement key fob. One or more replacement key fobs can be programmed. like programming new key fobs, Read PIN code/pin code calculation, Check number of keys, Generate key, Add key, All key lost.

GUIDED FUNCTIONS FOR VAG CAR

InPlus IP819TP Bluetooth Diagnostic Tool
Provides Detailed Step-By-Step operation guidance to simplify all the complicated functions implement, even a beginner can finish the diagnostics and services at ease. This Function is Compatible For VW, For Audi, For Seat, For Skoda cars.

SUPPORT CAN FD PROTOCOL + BROAD VEHICLE COVERAGE

InPlus IP819TP Automotive Diagnostic Tool with CAN FD Protocol Covers For GM MY2020+ models. No Extra CAN FD Adapter Needed. It can work on 88+ car brands, 140+ models and 10,000 cars globally. Customized for large Maintenance Shops, Workshops, Car Dealers, Auto Mechanic. Work for 12V Petrol Sedans, SUVs, Minivans, Light-Duty Trucks across the globe. With Software Updates, the Vehicle Coverage Grows Continuously!

3 YEARS FREE UPDATES + 3 YEARS WARRANTY + 24/7 TECH SUPPORT

InPlus IP819TP TPMS Diagnostic Scanner Comes with 3 Years Free Software Updates to add new incoming features, newer vehicle coverage and improve software performance, and 24/7 tech support. Even after the free update has expired, the device will still work normally. If you encounter any problems, our technicians will serve you for free for life.

XTOOL INPLUS IP819TP SUPPORTS 15 KINDS OF LANGUAGE

English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Simplified Chinese and traditional Chinese, Easily solve language barriers. Note: English is default language, if you need other language, Please contact seller.

TOP HARDWARD CONFIGURATION

🚩Support CAN FD 🚩3 Years Software Update🚩Android 10.0 systems🚩2G+32G 🚩7'' Touch Screen🚩2500mAh 7.3V Battery🚩1024*600 Resolution🚩4 Core 1.8 GHz CPU Processor

XTOOL INPLUS IP819TP ENHANCED VERSION TPMS PROGRAMMING TOOL

➤TPMS Sensor Activation: Works as an professional TPMS tool to activate 98% all-known TPMS sensors(315/433MHz) in market: XTOOL TS100 sensors, OE sensors, other programmed sensors.

➤TPMS Sensor Status Check: XTOOL IP819TP TPMS Scanner can help you to check the TPMS sensor conditions, including Sensor ID, Sensor Pressure, Sensor Temperature, and Sensor Battery, to locate and pinpoint the sensor issue quickly.

➤TPMS System Diagnostics: Diagnose the TPMS module, check the TPMS module health, read and clear TPMS trouble codes, Turn off the distracting MIL after repairing. Helps you to keep TPMS in good condition, extend tires’ lifetime, improving the overall vehicle safety!

➤TPMS Sensors Relearn: Relearn 98% TPMS sensors in market including OE sensors and after-market sensors to match with the vehicles' ECU with 3 ways: Stationary Relearn, Automatic Relearn, and OBD Relearn.

➤TPMS Sensor Information: Quickly Retrieve the sensor info: get to know the accurate sensor manufacturer, frequency, part number, printing number, etc. of OEM sensors or XTOOL sensors by rightly putting the sensor close to the TPMS icon of the scanner.

XTOOL IP819TP TPMS DIAGNOSTIC TOOL 4 WAYS TO PROGRAM TS100 SENSOR

XTOOL IP819TP TPMS Programming Tool provides 4 convenient and easy to use options to program XTOOL sensors(Durable for 3-5 years, the substitution of expensive OEM sensors) to replace broken sensors and meet the specifications of a particular vehicle before new sensor installation and relearn.

➤Automatic ID Generation: Automatically create a new unique ID(s) into TS100 sensors. After programming the TS100, you need to perform tpms relearn to match the new sensor ID to vehicle's ECU. If you don't know the original sensor ID or your original sensor was bad, you could choose this method.

➤Manual Input ID: Input the ID manually into the new installed TS100 sensor. You can find the ID on the original sensor. If you know the original sensor ID(the original sensor cannot be activated) and the tire/sensor position has not been changed, you could choose this method.

➤Copy ID By Activation: Trigger the original sensor, get the ID and and copy the ID to the new sensor. If your original sensor works and can be activated, and the tire/sensor position has not been changed, you can choose this method.

➤Copy ID By OBD: Diagnose the vehicle TPMS and get the ID, copy it to the new sensor. If your original sensor is missing and the ID can be read after diagnosis on the car, and the tire/sensor position has not been changed, you can choose this method.

IP819TP TPMS DIAGNOSTIC TOOL ACTIVATION OF 98% 315MHZ & 433MHZ TIRE SENSORS

1. Sensor Position

2. Sensor ID

3. Tire Pressure

4. Tire Temperature

5. Sensor Battery

IP819TP TPMS SCANNER PROVIDES 2 TPMS MODES FOR RELEARNING

1. OBD2 Relearn

2. Stationary Relearn

 

INPLUS IP819TP BLUETOOTH DIAGNOSTIC TOOL ADVANCED ECU CODING FUNCTIONS

ECU Coding for VW(VW/AUDI/SKODA): XTOOL IP819TP OBD2 Scanner Perform ECU Coding, Component Matching, Adaptive Data Reset; to Optimize Vehicle Performance and Customize Car Settings, Such as: Enabling or Disabling Certain Features (Seat Belt Alarm, Reverse Buzzer, Mirrors Auto Fold, Auto Stop/Start...), Updating Software, Making Changes to the Parameters.

➤Flash Hidden Functions(ECU Configuration): for BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/ MAZDA for FORD/LINCOLN: IP819TP helps to activate the higher-level car functions and disable any annoying features including: Disabled the seat belt buzzer, Wind the windows down with the remote fob, Deactivate the Start/Stop function, etc.

➤VAG Guided Function for VW(VW/AUDI/SKODA): Featuring guided functions, the IP819TP scan tool allows you to complete the complicated functions under the step by steps instructions with no troubles and no worries.

OE-LEVEL ALL SYSTEMS DIAGNOSTICS

InPlus IP819TP Automotive Scanner can perform dealership level diagnosis, analysis and maintenance to ensure more all-around, fast, and accurate! Diagnostic functions included: Read/ Erase Codes; Live Data; Freeze Frame; ECU Information; Active Tests; PID & Graph.

➤ECU Information: Displays detailed ECU information. Select to view the information screen.

➤Read Trouble Codes: Displays detailed DTC information retrieved from the vehicle control module

➤Erase Trouble Codes: Allows you to erase DTCs and other data from the ECU.

➤Live Data: Retrieves and displays live data and parameters from the vehicle's ECU.

➤Read Frozen Frame: Record the status of the fault code, fault level, vehicle kilometers and time

All Systems it can quickly diagnose: Engine System (ECM), Auto Transmission (TCM), Anti l-o-c-k Brake System (ABS), Electronic Parking Brake (EPB), Battery Manage System (BMS), Tire Pressure Monitoring System (TPMS), Supplemental Restraint System (SRS), Immobilizer (IMMO), Suspension, Cruise Control System, Steering Angle System, Air Conditioning System, Audio System, Body System, etc.

FULL BI-DIRECTIONAL CONTROLS/ACTEST TEST

XTOOL InPlus IP819TP Bidirectional Scanner also known as active test or actuator test, can output the commands to ECUs, read the ECU data and monitor the operation of the actuators. Through comparative analysis, the car diagnostic scanner will let you quickly know whether a specific system, component, or subsystem is functioning properly or not, even a small fault that is hard to find out, to provide in-depth diagnostic tests and pinpoint fault causes.

➤EVAP Tests

➤Compression Test

➤Turn On/Off Radiator Fan

➤A/C Clutch On/Off

➤Fuel Pump

➤Window/Mirror/Door Lock Test

➤Pump and Value Tests

➤Interior & Exterior Lights Test

➤Sound Horn Test

Note: Active Tests available vary across vehicles.

36+ SPECIAL FUNCTIONS TO PERFORM COMPREHENSIVE VEHICLE SERVICE

1. ECU Configuration: Re-flash the hidden function of the car and customize the vehicle as need.

2. ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.

3. Fuel Trim Reset: Reset the fuel trims provides for a chance that your adaptive fuel map could become stable.

4. Immobilizer: Disable a lost vehicle key to protect the vehicle from being stolen and add the new key.

5. Stop-Start Reset: This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support)

6. BMS Match: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.

7. DPF Regeneration: Clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

8. Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.

9. SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.

10. Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

More Special Functions: Oil Light Reset, EPB, SAS, DPF, BMS Reset, Throttle, TPMS Reset, ABS Bleeding, Injector Coding, Key Programmer, Gearbox Match, Suspension, Window Initialization, Seat Match, Headlight, ECU Configuration, A/F settings, Start/Stop Reset, Airbag Repair, Instrument Cluster, Language Change, Transporte Mode, Tire Upgrade, Gear Learning, Power Balance, EEPROM, Electronic Pump Activation, EGR Relearn, VGT Relearn, HV Battery, A/C Relearn, Speed Limit, Clutch Adaption, FRM Reset, Rain/Light Sensor, Reset Control Unit and etc. Note: Special Functions do NOT work on all cars.

XTOOL INPLUS IP819TP IMMOBILIZER TOOL - KEY GENERATOR

➤Read Pin Code

➤Generate key, Key Refresh

➤Make Dealer Key

➤All Key Lost

➤Immobilizer Data Reading & Writing

➤Backup IMMO Data

➤Remote Frequency Detection

- And more...

Note: Not all cars support key programming. Please send the specific car model to the seller to check the compatibility before purchasing.

MORE ADDED FEATURES WITHOUTEXTRA COST-MAKE REPAIRING EASIER

➤Support CAN FD Protocol: Compatible with newer vehicles that are CAN FD (for GM 2020+ vehicles), saving you tons of money on buying adapters,and no more worry about connector loss.

➤Refresh Hidden Functions: To unlock features that are not available to vehicle previously out of auto factories like rear-view mirror folding, and disable annoying features that are disturbing while driving seat belt alarm, max speed limiter, etc. for BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA /FORD/LINCOLN Only, Check with us before purchase!

➤Guide Functions For VAG: InPlus IP819TP Automotive Scanner
can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/Audi/Skoda, etc.

➤8 In 1 Live Data Dispaly: Up to 8 real-time data PIDs can be viewed at the same time, such as oil pressure, fuel temperature, coolant temperature, transmission oil temperature, fuel trim, O2 sensor, etc., displayed in text or graph form.

➤Fast Auto Vin Scan: Simplify the vehicle diagnostic process with just one click. XTOOL InPlus IP819TP Automotive Scanner
tool adopts the latest car VIN technology, allowing technicians or repairers to easily identify vehicle information such as manufacturer, model, year and place of manufacture, etc.

➤Wireless Bluetooth Diagnostics: InPlus IP819TP Bluetooth Diagnostic Tool
offers wireless connection feature to achieve remote diagnosis at a long wireless range, get rid of the shackles of cables, make it easy to move from the dash to the front of the car.

➤3 Years Free Update: InPlus IP819TP automotive diagnostic tool comes with 3 Years Software Updates to continuously expand vehicle coverage, add newly developed features, improve interact experience and fix software glitches.You can use the last update software programs even if you choose not to renew subscription! No more worry about the function disappearing or being locked.

WORK FOR 85+ CAR MAKER, 140+ BRANDS, COVERED 10,000+ CARS

XTOOL InPlus IP819TP TPMS Scanner is specially customized for large Maintenance Shops, Workshops, Car Dealers, Auto Mechanic. Work for 12V Petrol Sedans, SUVs, Minivans, Light-Duty Trucks across the globe.

Europe Cars: for DEMO, for VW, for MINI, for LANDROVER, for SEAT, for FERRARI, for FORD, for OPEL, for ALFA for ROMEO, for VOLVO and more

America Cars: for DEMO, for GM, for FORD, for CADILLAC, for CHEVROLET, for GMC, for HUMMER, for JEEP and more

Asia Cars: for Demo, for TOYOTA -LEXUS, for ISUZU, for MAZDA, for KIA, for INFINITI, for ACURA, for NISSAN and more

Australia Cars: for Demo, for Ford

XTOOL INPLUS IP819TP SCANNER SUPPORTS 15 KINDS OF LANGUAGE

English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Simplified Chinese and traditional Chinese. Easily solve language barriers and improve diagnostic efficiency.

STEPS ON SET THE LANGUAGE

1. Activate the device with email address and serial number

2. Send the serial number to the seller to authorize the language

3. Switch language in settings

4. Click Update Device

Note: English is default language, if you need other language, please contact seller.

XTOOL INPLUS IP819TP ADVANCE HARDWARE CONFIGURATION

Operating System:Android 10.0

Storage:2G+32G

Processor:4 Core Processor 1.8Ghz

Display:1024 x 600 Resolution

Screen:7 inches Touch Screen

Battery: 5000mAh, 3.7V

Input Voltage:12V

UNIQUE TOOL KIT

XTOOL IP819TP tpms programming tool is equipped with IP819TP Scanner, USB Cable, Tablet Charger, US Adapter, EU Adapter, EN Adapter, and USB 3.0 to Type-B Cable.