ANCEL FD700 OBD2 Scanner Automotive Scanner Full System 12 Special function ----For ford

NOTE: Dear customer, If you are not sure whether the product supports your car model,please provide your model and year before purchase so that we can check for you whether the equipment supports your car, thank you for your understanding and cooperation

ANCEL FD700 OBD2 Scanner Basic Functions:

1.Read Fault Codes
2.Erase Fault Codes
3.Read Datastream
4.Retrieves VIN Information 
5. I/M Readiness
6. EVAP Testing

Multi-Special Functions for Ford/Lincoln/Mercury with OBD2 Functions For All Cars Make After 1996

1. 6 OBDII functions: Read Fault Codes, Erase Fault Codes, Read Datastream, Retrieves VIN Information, I/M Readiness, EVAP Testing;

2. Injector Coding(IQA): Carry out this procedure to enter the new IQA Codes whenever a fuel injects is replaced or to make a correction to the existing codes currently stored in the PCM. The adjustment codes increase injector efficiency on the engine and improve emissions;

3. Reset PCM KAM: Resetting KAM will clear learned values the PCM has stored for adaptive systems such as idle and fuel. After a Diagnostic Trouble Code (DTC) causes an engine or vehicle warning light, need reset KAM;

4. Throttle Position Sensor (TPS) reset: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronic fuel-injected car, a throttle position sensor and airflow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair;

5. Diesel Particulate Filter (DPF) Regeneration: Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;

6. Reset the Oil Change Indicator: Perform this procedure after the engine oil has been drained and refilled;

7. BMS Reset: This procedure resets the battery monitoring system. Once you replace the battery in the vehicle, you need to perform this step;

8. DPF Reset, Reset Transmission Tables, Reset the Powertrain Control Module Learned Values, Reset the Oil Change Indicator, Reset the Heated Exhaust Gas Oxygen Sensor Learned Values, Reset the Fuel Injector Learned Values, Reset the Fuel Injection Pump Learned Values, Reset the Exhaust Gas Recirculation Valve Learned Values, Reset the Diesel Particulate Filter Learned Values, Reset the Intake Air Throttle Valve Learned Values;

9. Steering Angle Sensor Calibration, Clear Transmission Adaptive Tables, Transmission Learning, Steering Wheel Position Sensor Calibration, Steering angle sensor calibration, IQA, Injector Correction Factors, Fuel Injector Correction Factors, Fuel Injection Pump Learn, EPB Maintenance Mode, DPF Regeneration Suspension, DPF Manual Regeneration, Reset KAM, BMS Reset, Diesel Particulate Filter Static Regeneration.

All-System Diagnostic Scanner for Ford Lincoln Mercury

1. Engine System: The engine determines the power, economy, stability of the car. The FD700 OBD2 scanner can support 6 modes of OBDII functions & check battery voltage. Easily identify vehicle problems and turn off the engine lights. Help you pass the smog test and keep your car in the best condition.

2. TPMS: When there is a problem with your car's tire pressure, or you have inflated the tire to the correct PSI, or the TPMS warning light turns on for no reason. At this time, you must reset the TPMS so the light turns off.

3. SRS: The FD700 can read and erase the SRS(Airbag) system error code, turns off the airbag warning light. To prevent the dreadful danger caused by the airbag not working properly after a collision.

4. SAS: SAS Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor. The FD700 helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

5. Battery System Diagnosis: Evaluate the battery charge state, monitor the closed-circuit current, battery management system reset, detect real-time data from 12V batteries, and display BATTERY DATA with fluctuations ranging from 8V to 18V.

6. EPB: FD700 scanner can read and clear EPB trouble codes and is capable of retrieving fault codes information from the ECU.

7. ABS: It helps maneuverability while hard braking. ABS essentially prevents the wheels to lock up and skid when brakes are slammed.

8. Transmission: Auto Transmission is a set of transmissions used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. FD700 OBD2 scanner can read/clear codes and read data stream from AT.

9. Oil System: Oil reset, check the oil at regular intervals, and have the car serviced regularly. After draining the oil out of the engine, the FD700 scan tool can help you to reset the Oil service lamps.

ANCEL FD700 Diagnostic Tool Feature:

1.Service Reset
2.Tire Pressure Reset
3.Battery Registration
4.Throttle Learning
5.EPB Replace Brake Pads
6.Transmission Control Module
7.Oil Reset
8.Check Engine
9.Airbag Reset
10.ABS Reset
11.ECT Reset
12.SAS Reset

ANCEL FD700 Supported Language:

English, French, German, Spanish, Russian, Portuguese, Swedish, Finnish, Denish, Norwegian

Lifetime free update :

ANCEL FD700 Key Description

Package List