AdblueOBD2 Emulator for
MAN Trucks Plug and Drive Ready Device by
OBD2
adBlueOBD2 emulator for
MAN Trucks is a Plug & Drive Ready device to mulate working adBlue systems
and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter
systems, even with damaged adBlue SCR system.
Top 5 Reasons to Get
AdblueOBD2 Emulator for MAN Trucks:
1. ADBlueOBD2 is very
easy to install. Just Plug it into OBD2 connector of truck or bus and remove the
fuses mentioned.
2. ADBlueOBD2 will
override ADBlue system instantly, it will stop the usage of adBlue liquid and
disable Nox sensors.
3. Without any power
loss of the engine or any warnings on the dashboard and in diagnostic
system.
4. ADBlueOBD2 does not
damage the engine and not cause any negative effects to the truck factory
setting.
5. ADBlueOBD2 does not
change any of the settings permanently. To turn back to the truck's original
settings, just unplug adBlueOBD2 from OBD2
connector.
Installation and
Calibration for MAN Trucks:
1. Pull the Key out
from the ignition.
2. Remove the following
Fuses (MAN) 894 - 737 -
738
3. Plug adBlueOBD2 into
OBD2 connector
4. Turn on the ignition
and check the level of adBlue, if it shows 50% or
70%.
5. If any fault light
appears on dashboard, delete via service
scanner.
Legal
Notice:
AdBlue/DEF (Diesel
Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to
use adBlue/DEF fuel. You can use this device, if you are unable to find a
station to fuel up your adBlue/DEF tank.
Certificates:
CE/RoHS
Package
including:
1pc x adBlueOBD2
Emulator Box Interface
1pc x User Manuel
English