AdblueOBD2 Emulator for DAF Trucks Plug and Drive
Ready Device by OBD2
AdblueOBD2 Emulator for DAF
Description:
adBlueOBD2 is a Plug&Drive Ready device to mulate
working adBlue systems and NOx sensors
on trucks, which equipped with EURO 4/5/6 catalytic
converter systems,even with damaged adBlue SCR system. dBlueOBD2 is
easy to install.
Top 5 Reasons to Get AdblueOBD2
Emulator:
1. ADBlueOBD2 is very easy to install. Just Plug it
into OBD2 connector of truck or bus and remove the fuses
mentioned.
2. ADBlueOBD2 will override ADBlue system instantly,
it will stop the usage of adBlue liquid and disable Nox
sensors.
3. Without any power loss of the engine or any
warnings on the dashboard and in
diagnostic system.
4. ADBlueOBD2 does not damage the engine and not
cause any negative effects to the truck factory
setting.
5. ADBlueOBD2 does not change any of the settings
permanently. To turn back to the
truck's original settings, just unplug adBlueOBD2 from OBD2
connector.
Installation and Calibration for DAF
Trucks:
1. Pull the Key out from the
ignition.
2. Remove the following Fuses
(DAF) 6 - 15A
E357 -
20A
3. Plug adBlueOBD2 into OBD2
connector
4. Turn on the ignition and check the level of
adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete
via service scanner.
Legal
Notice
AdBlue/DEF (Diesel Exhaust Fluid) is used to reduce
NOx emissions in vehicles. We
recommend you to use adBlue/DEF fuel. You can use this device,
if you are unable to find a station
to fuel up your adBlue/DEF
tank.
Certificates :
CE/RoHS
Package
including:
1pc x adBlueOBD2 Emulator Box
Interface
1pc x User Manuel
English