NEC Lexia-3 Lexia3 Diagbox V9.68 PP2000 921815C Full Chips For Citroen for Peugeot

Lexia3 Full chip version:

1. Newest software version Diagbox V9.68

Diagbox Version

Our Diagbox Suppoting Update to Latest Version V9.68, if u want to update to newest diagbox,please feel free to contact us and we will send you link to download Latest diagbox Version.

(please Disconnect internet when install software,otherwise device damaged and broken)

2. With 4 cables,supports more old car models

3.LEXIA3 Full Chips Version With Power Function:

For programming, diagbox support basic programming, but some programming like car alarm system need account username and password, we don't supply& haven't username and password, only for citroen and for eugeot center repair shop has username and password, please note it.

4. Support Multi-Language:

Lexia 3 PP2000 Software supported language:
English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.

Lexia3 Diagbox Software supported language:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.

5.Excellent Full Chip PCB Board With Gold Edge,12pcs New NEC Japan Relay,7pcs Optocouplers

Dealer Lexia ,lexia 3 PP2000 diagnostic Tool for comprehensive for Citroen and for Peugeot cars diagnostic. You can do all as a authorized dealer does. Lexia, lexia 3 PP2000 diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics Lexia ,lexia 3 PP2000 is performed via OBD2 connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

1.Lexia ,lexia 3 PP2000 is compatible with for Citroen cars including: C1,C2,C3,C4,C6,C8,for C-CROSSER,for NEMO,for BERLINGO,for JUMPY,for JUMPER,for AX,for SAXO,for BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.

2.Lexia ,lexia 3 PP2000 is compatible with most for Peugeot cars from 1995,but it can not work good with for Peugeot 307 after 2004 year.If you have the two types of cars, please pay attention, please check with us first before purchase.

3.Lexia ,lexia 3 PP2000 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Lexia 3 PP2000Supported Functions:

Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

1. Read Identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc.

2. Read Fault Codes

Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").Program supports report printing or copy to clipboard.

3. Clear Fault Codes

This function clears all stored fault codes and other diagnostic information.

4. Auto-Scan (Complete Car Scan/Test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6. Actuator Test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc.)

7. Programming Functions/Adaptation

This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

8. Control Unit

Hardware and software requirements

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDDspace and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP withthe latest service pack installed.

Car coverage:

1.P2000,Lexia 3 is compatible with most for Peugeot cars from 1995.

2.PP2000,Lexia-3 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

For Citroen

C-Zero/ C1/ C2/ C3/ C3 PICASSO/ DS3/ C-ELYSEE/ C4/ C4 CACTUS/ C4 PICASSO/ DS4/ DS 5LS/ C5/ DS5 /C6 / C8/ C-CROSSER/ C4 AIRCROSS/ NEMO/ BERLINGO/ JUMPY/ JUMPER/ AX/ SAXO/ BX/ ZX/ XSARA/ XANTIA/ XM/ EVASION/ C15/ FUKANGFUKANG 988/ ELYSEE/ C-ELYSEE(R3)/ C-TRIOMPHE/ C-QUATRE

For Peugeot

iON/ 107/ 108 /206 207/ 207+/ 280/ 301/ HOGGAR/ 307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/

1007/ 2008/ 3008/ 4007/ 4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/

406/ 605/ 806

Installation TIPS:
1. PP2000 and lexia softare only be installed inXP system 32 bit.Diagbox software only be installed inwin7 system 32 bit.

2. Pls don't install lexia and pp2000 software together with Diagbox software in one pc.Diagbox software has included pp2000 and lexia software, Diagbox need be installed in one laptop individually.

3. When installing software, pleaseclose your anti-virus software and firewall.

otherwise the software willbe damaged.

4.please cut the file "C:AWRoot\bin\fi\APPDIAG.SYS" out before update, and then click update package! After complete update please paste the cutted file back into the previous folder which can avoid activating problem.

Package List:
1 x Main unit Full Chip
1 x OBD2 16PIN Cable
1 x OBD2 to Clip Cable
1 x Long 9pin to USB cable
1 x Short 9pin to USB cable
1 x CD