AdblueOBD2 Emulator for SCANIA Trucks Plug and Drive Ready Device by OBD2
adBlueOBD2 is a Plug&Drive Ready
device to mulate working adBlue systems and NOx sensors
on trucks, which equipped
with EURO 4/5/6 catalytic converter systems, even with
damaged adBlue SCR
system.
Top 5 Reasons to Get
AdblueOBD2 Emulator for Scania
Trucks:
1. ADBlueOBD2 is very
easy to install. Just Plug it into OBD2 connector of truck or bus
and remove the fuses
mentioned.
2. ADBlueOBD2 will
override ADBlue system instantly, it will stop the usage of adBlue
liquid and disable Nox
sensors.
3. Without any power
loss of the engine or any warnings on the dashboard and in
diagnostic system.
4. ADBlueOBD2 does not
damage the engine and not cause any negative effects to the
truck factory
setting.
5. ADBlueOBD2 does not
change any of the settings permanently. To turn back to the
truck's original settings, just
unplug adBlueOBD2 from OBD2 connector.
Installation and
Calibration for SCANIA Trucks:
1. Pull the Key out
from the ignition.
2. Remove the following
Fuses (SCANIA) Terminal- 42
3. Plug adBlueOBD2 into
OBD2 connector
4. Turn on the ignition
and check the level of adBlue, if it shows 50% or
70%.
5. If any fault light
appears on dashboard, delete via service
scanner.
Legal
Notice:
AdBlue/DEF (Diesel
Exhaust Fluid) is used to reduce NOx emissions in vehicles.We
recommend you to use adBlue/DEF
fuel. You can use this device, if you are unable to find a station
to fuel up your adBlue/DEF
tank.
Certificates :
CE/RoHS
Package
including:
1pc x adBlueOBD2
Emulator Box Interface
1pc x User Manuel
English