0 global ratings
Fast Shipping & No Tax
US Check: Ship from US
UK Check: Ship from UK
EU Check: Ship from Czech
Looking for help? Please contact Whatsapp: +86-19892834301
VXSCAN OEM 2006-2016
Ford TPMS Sensor Training Tool Activation Tool
Ford
cars and trucks need to have their Tire Pressure Monitoring System sensors
re-trained or activated after the installation of new wheels and tires or after
a tire rotation.
Following
these simple steps anyone can re-train their TPMS sensors and save themselves a
costly trip to the dealership.
Ford
cars and trucks newer than 2007 commonly use TPMS sensors that monitor the air
pressure in the wheels. The sensors each communicate with the vehicle
through an access point at each wheel that they have to be "trained" or
programmed to communicate with. This is done easily using an inexpensive TPMS
Training tool.
Tire Pressure
Monitoring System (TPMS) Sensor Training Program Tool is a direct fit for the
following:
2007-2014
Ford F-150
2008-2015
Ford F-250 F-350 F-450 F-550 Super Duty
2007-2015
Ford Mustang
2007-2014
Ford Edge
2006-2015
Ford Escape
2008-2015
Ford Expedition
2006-2016
Ford Explorer
2008-2015
Ford Flex
2008-2015
Ford Taurus
2008-2015
Ford E-150 E-250 E-350 E-450 Econoline Vans
2008-2015
Ford Fiesta
2008-2015
Ford Focus
2008-2015
Ford Fusion
2008-2011
Ford Crown Victoria
2011-2015
Ford Transit Connect
2006-2011
Ford Ranger
2007-2015
Lincoln MKX
2007-2015
Lincoln MKT
2008-2015
Lincoln MKZ
2008-2015
Lincoln MKS
2008-2015
Lincoln Navigator
2008-2011
Lincoln Town Car
2007-2008
Lincoln Mark LT
2006-2010
Mercury Mountaineer
2006-2010
Mercury Monterey
2006-2011
Mercury Mariner
2006-2011
Mercuy Grand Marquis
2006-2011
Mercury Milan
Genuine Ford Part
Number: 8C2Z-1A203-A
How to Train Ford
Tire Pressure Monitior Sensors TPMS?
1.
Turn the ignition switch to the OFF position, then press and release the brake
pedal.
2.
Cycle the ignition switch from the OFF position to the RUN position 3 times,
ending in the RUN position.
3.
Press and release the brake pedal.
4.
Turn the ignition switch to the OFF position.
5.
Turn the ignition switch from the OFF position to the RUN position 3 times,
ending in the RUN position.
*The
horn will sound once and the TPMS indicator will flash if the training mode has
been entered successfully. If equipped, the message center will display TRAIN LF
TIRE.*
6.
Place the tire pressure monitor activation tool on the LEFT (Driver's Side)
FRONT tire sidewall at the valve stem.
Press
and release the test button repeatedly on the TPMS Tool until the horn beeps.
(It
may take up to 6 seconds for the tool to activate the sensor, Leave the tool on
the sidewall for the entire 6 seconds).
The
horn beeping indicates that the body control module has recognized the TPMS
sensor.
7.
Within 2 minutes of the horn sounding confirming programming of the LF
tire, place the TPMS tool on the RIGHT (Passenger's Side) FRONT tire sidewall at
the valve stem and press the test button to activate the sensor.
8.
Repeat step 7 for RIGHT REAR followed by LEFT REAR tire in that order. The
procedure is complete after the last tire has been trained.
When
training is complete, the message center (if equipped) will display TIRE
TRAINING COMPLETE. For vehicles not equipped with a message center, successful
completion of the training procedure is verified by turning the key to the OFF
position without the horn sounding. If the horn beeps twice when the switch is
turned to OFF the training procedure was not successful.
NOTE
1: If
the vehicle or wheels/sensors have been stationary for more than 30 minutes, the
sensors will go into a "sleep mode" to conserve battery power. It is necessary
to wake them up by simply moving them or rolling the tires before they will
communicate with the vehicle.
NOTE
2: The
TPMS training procedure must be done on one vehicle at a time, in an area
without radio frequency interference - at least 3 feet away from other vehicles
equipped with TPMS sensors.
NOTE
3: Vehicles
with different tire pressures front-rear like F-Series trucks and E-Series vans
also require TPMS re-training after a tire rotation. Failure to train the
sensors will cause the TPMS warning light to illuminate on the dash.
Package
Includes:
1pc x NEW OEM 2006-2016 Ford TPMS Sensor Training Tool
0 Stars of 5,0 Reviews.
Tel