Creator C502 BENZ & OBDII/EOBD  Multi-system Scanner

Creator C502 BENZ Software Version: C502 V10.1

Supports all the BNEZ models before 2016
Include Chassis: 117, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 245, 246, 251, 253, 292, 461, 463, X 164, X 204

Functions: Read codes, Erase codes, ECU information

Creator C502 OBDII & EOBD Software Description:
 Works on all 2001 and later OBDII compliant PETROL European vehicles
 Works on all 2004 and later OBDII compliant DIESEL European vehicles
 Works on all 1996 and later OBDII compliant US and Asian vehicles
 Easily determines the cause of the "Check Engine Light ( MIL)"
 Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3,and U1) codes
 Turns off Check Engine Light (MIL), clears codes and resets monitors
 Displays DTC definitions on unit screen
 Views freeze frame data
 Identifies pending codes
 Reads live PCM datastream
 Graph displays live PCM datastream
 Read I/M Readiness Status
 Displays live O2 sensor test data
 Performs modules present test
 Retrieves vehicle information (VIN, CIN and CVN)
 Supports CAN (Controller Area Network) and all other current OBD-II protocols
  
A communication error occurs if the scan tool fails to communicate with the vehicle’s ECU (Engine Control Unit). 
You need to do the following to check up: 
A) Verify that the ignition is ON; 
B) Check if the scan tool’s OBD II connector is securely connected to the vehicle’s DLC; 
C) Verify that the vehicle is OBD2 compliant; 
D) Turn the ignition off and wait for about 10 seconds. Turn the 
E) Ignition back to on and continue the testing. 
F) Verify the control module is not defective
 
Scan tool doesn’t power up 
If the scan tool won’t power up or operates incorrectly in any other way, you need to do the following to check up: 
A) Check if the scan tool’s OBD II connector is securely connected to the vehicle’s DLC; 
B) Check if the DLC pins are bent or broken. Clean the DLC pins if necessary. 
C) Check vehicle battery to make sure it is still good with at least 8.0 volts. 
 
Package List:
1pc x C502 Machine
1pc x  User's Manual