MUCAR KEY581 Universal Key Generator Kit Key Fob Programmer Immobilizer Tool Key Creation IMMO Learning Chip Read Write Cloning

Why Should You Choose MUCAR KEY581 ?

1. Global Version No IP Problem

2. Immo Programming

3. Key Generation&Matching

4. Key Frequency Detection

5. Ignition Coil Detection

6. OBD Matching (pin)

7. Chip Generation& Copying

8. Remote Generation

9. Full OBD2 function, DTC lookup

10. 9 type of Maintenance Reset Function

11. Supports 18 languages

Immobilizer Matching:

It electronically binds thekey chip with the vehicle Immobilizer system(such as the ECU) through authentication, ensuring that only authorized keys can start the vehicle.

Remote Generation

It creates orcopies the wirelesssignal of a vehicle remote control,enabling remote operations such as door unlocking and trunk access.

Remote Cloning:

It copies the wireless signal of an existingremote control directly to a new remote,allowing the new remote tofully perform all original functions(e.g.,unlocking,car locating).

CHIP READ & CLONE & WRITE

● Read Chip: Gives you the access to some basic information pertaining to the key, including chip type, IMMO type, transponder ID, locking status, and code mode.

● Clone Chip: It used to directly clone and generate a functional chip for your vehicle. The whole process saves the trouble of using the old OBD approach.

● Write Chip:Choose an IMMO type (which can be accessed by the transponder reading function) and start editing according to your needs.

Read Voltage & Leakage Current Detection:

This function is only used for leakage detection and voltage detection of remote, please do not use it for detection of other products.

Leakage detection: it can detect the current when the remote is leaking, and support current range is 1 microamp~35 milliampere(Do not insert battery into remote).

Voltage detection: it can detect the voltage of the remote battery,and support voltage range is 0V-36V

Full OBD2 Functions:

1.Oil Reset
If the oil maintenance light is on, the car needs to be maintained. After the maintenance, the driving time and other data should be reset to zero, so that the maintenance light will be turned off, and the car system will enable a new maintenance cycle.

2.Brake Reset
1. When the brake is used to a certain thickness, the brake sensor line will be worn, and the brake pad sensor line will send a signal to the car computer to prompt the replacement of the brake pad. After replacing the brake pads, the brake needs to be reset, otherwise the car will still alarm.
2. Need to do the reset situation:

a. replace the brake pad and brake pad wear induction line;

b. brake pad indicator light on;

c. brake pad sensor line short-circuit repair;

d. After replacing the servomotor

3.BMS battery reset
For a vehicle with the battery management function, if the battery status is detected as faulty (aging or damaged), the fault code will saved in the ECU. After replacing the battery and running "BMS Reset", it can delete the fault code and re-match, based on the relevant information of the existing battery as the standard, let the monitoring unit monitor. Avoid false positives from instrument error messages

4.SAS Steering Angel Reset
After the vehicle is disassembled or replaced with parts related to the steering function, the steering Angle learning function needs to be performed.

5.Injector Coding
After replacing the ECU or injector, each cylinder injector needs to be coded to confirm or recode. So that the cylinder can better identify each cylinder injector, accurate control of fuel injection.

6.ETS Learning(throttle matching)
Need to perform throttle matching: Replace the electronic control unit, power off the electronic control unit, replace the electronic throttle assembly, replace or disassemble the intake port, clean the throttle.

7.AFS Headlamp Reset
This function can initialize the adaptive headlight system. The adaptive headlight system can decide whether to automatically turn on the headlights according to the ambient light intensity, and monitor the vehicle's driving speed, body attitude, etc., and timely adjust the lighting Angle of the headlights. When replacing a new headlight, headlight automatic motor, or there is a fault code that is not set by the headlight, it is necessary to perform headlight matching features.

8.Gearbox (Transmission )Reset
When the transmission parts wear and aging become serious, the adaptive learning of the control unit does not work, and the parts need to be repaired and replaced, then the automatic transmission control unit needs to be forced to learn.

9.Gear Learning
Gear learning is required when replacing the engine ECU, crankshaft position sensor, crankshaft flywheel, and fault code that the gear has not learned,it is necessary to gear learning.

Support CAN-FD Protocal Vehicels

Concerning immo programming, MUCAR K581 is designed with a CAN-FD protocal, making it possible to complete immo programming for various CAN-FD models such as Cadillac, Buick,Chevrolet,Cadillac CT4/CT5, Buick GL8, Encore, etc. 

Support Wide Coverage Vehicles & Multi-languages:

IMMO Key Learning via OBD on 90% vehicles, for Fiat, for BMW, for Volkswagen, for Toyota, for Honda, for Buick,for Chevrolet,for Corolla,Camry,REIZ,VIOS,LEVIN,CROWN,RAV4,Hiraks,for Lexus,for Cadillac CT4/CT5, for Buick GL8, Encore etc.

Welcome to send your car model and year to us to check compatibility first.

Suitable for:

For repair technicians:

Convenient for performing car key-related operations for customers.

For small repair shops:

Reasonably priced and cost-effective; no need to purchase expensive equipment to program and pair keys for different brands of vehicles.

For DIY car owners:

Car owners with some repair skills and strong hands-on abilities can keep this feature-rich, powerful, and economical key programming device on hand.

Package Lists